home go daddy
home telus

**********************************
cisco /linksys info
more linksys cisco info
Forgotten Router Password
If you have forgotten your router's password, please follow the instructions below to
resolve your issue.
The router can be set to factory default by pressing the Reset button of the router and
resetting through the router’s web-based setup page. Pressing the Reset button on the
back of the router for 30 seconds will reset your router to its factory default settings. Any
settings on the router will be erased and the router’s IP address will become
“192.168.1.1,” the username is still blank, and the password will be “admin.”
To perform a hardware reset on your Linksys router follow the steps below.
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the device before resetting.
Step 2:
Press the Reset button of the router for 30 seconds.
Step 3:
If the normal reset does not work, unplug then plug back the router's power adapter while
pressing the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router’s web-based setup page. For instructions, click here. more linksys cisco info

How to access the router’s web-based setup page
Why do I need to access the router’s web-based setup page?
Learning how to access the router’s web-based setup page is very important especially if
you want to configure advanced settings. Some common configurations that can be done
on the page is to set up a wireless security for your network, forward ports for your game
console and video camera, and set up your Linksys router manually.
Follow the steps below to learn how to access your Linksys router’s web-based setup
page:
IMPORTANT: Before accessing the router’s web-based setup page, make sure the router
is powered ON and the computer is wired to one of the Ethernet ports on the router
(1, 2, 3 or 4).
NOTE: The Linksys routers have auto-sensing capabilities and don't require the use of
cross-over or straight-through cables.
Accessing the router’s web-based setup page
After connecting your computer to the router, make sure that the LED corresponding to the
port where the computer is connected to is ON.
Step 1:
Launch a web browser like Internet Explorer, Mozilla Firefox or Safari®.
Step 2:
In the Address bar, enter “192.168.1.1” as the router’s default IP address then press
[Enter]. If this doesn’t work or if the IP address of your router has been changed, enter it
instead.
Step 3:
Enter “admin” in the Password field then leave the User name blank. If you have set up a
User name and Password for your Linksys router before, enter your personalized
credentials instead.
NOTE: If you have forgotten your password, you can reset your router to its factory
default settings. To learn more, click here. If you are still unable to access the router’s
web-based setup page, click here for troubleshooting instructions.
QUICK TIP: For Linksys Smart Wi-Fi Routers, you can enter “http://myrouter.local” on the
Address bar to access its web-based setup page.
**********************************




**********************************
about Book by Os Guinness
you may click on this link and it will play or else / right click and save the file first
and then open it. it is a very short audio file.
*********************************



*********************************

Google
Bing

2015 Calendar